Magnetostrictive position sensor M-RSL 500mm

measurement length: 500mm

• Robust and reliable, fully enclosed design
• Non-contact measurement
• Absolute output, no need for zeroing
• Modular design
• Protection class up to IP68
• Low-power design, effectively reducing system temperature fluctuations

General characteristics of the M-RS series:

M-RSL - position sensor
M-RSF - liquid level sensor

Measuring range: 50~7000mm

Output:

4~20mA (min./max. load 0/500Ω)

20~4mA (min./max. load: 0/500Ω)

0~5VDC (min. load>5KΩ)

0~10VDC (min. load>5KΩ) ±10VDC (min. load>5KΩ)

SSI

Resolution: 16 bit D/A

Linear deviation: <±0.01%FS (min.±50μm)

Repeatability: <±0.001%FS (min.±1μm)

Update time: 0.5 ms (min. < 1 m) 1.0 ms (1 m < range < 2 m) 2.0 ms (2m<range<4m) 4.0ms(4m<range<7m)

Socket mode: direct socket or plug
Input voltage: 24VDC (-15/+20%)
Operating current: <60mA (varies with range)

Polarity protection: -30VDC maximum

Overvoltage protection: 36VDC maximum
Isolation capacity: 500V (between signal ground and shell)

Construction and materials:

Housing: 304L stainless steel

Rod: stainless steel magnet

Positioning magnet: 304/316 or float

Outer tube pressure: 35MPa (continuous) 70MPa (peak)

Ordering codes for the cable:

Type of cable end:

C - straight cable

Y - waterproof

H - M16 aviation plug, 6-pin

T - M16 aviation plug, 8-pin

J - M16 aviation plug, 6-pin 90° angled aviation plug

E - M16 aviation plug, 6-pin (import)

Type of cable:

P - PVC cable

R - PUR cable

G - high-temperature cable

Cable length:

Unit - m

Dimensions: